360 Tuna Fishers Forum banner

Striped bass slow pitch rod/reel?

2 reading
9.6K views 31 replies 7 participants last post by  north coast  
#1 · (Edited)
Want to try slow pitch jigging for striped bass and bluefish off capecod. Spinning rod as I do not use conventional.

Any suggestions?
Thinking Black hole charter special slow pitch rod. Any reviews on this?
And maybe a penn slammer 3 4500
 
#3 ·
Slow Pitch and spinning shouldn't be in the same sentence.

There's plenty of pictures of the Black Hole fishing bait, but I've never seen it working s slow pitch jig, for what it's worth.

Temple Reef Gravitate retails for ~$300 which will give you the best action on a jig at that price point in the market.
 
#4 ·
Slow Pitch and spinning shouldn't be in the same sentence.

There's plenty of pictures of the Black Hole fishing bait, but I've never seen it working s slow pitch jig, for what it's worth.

Temple Reef Gravitate retails for ~$300 which will give you the best action on a jig at that price point in the market.
Why would spinning not work for slow pitching?
 
#5 · (Edited)
Several reasons. First, slow pitch is highly dependant on maintaining contact to the bottom. When you open the bail on a spinning rod it's sloppy and doesn't allow the control necessary.

The second point relates to staying vertical. Unless you are fishing with zero current or on a spankered boat, you will need to control the fall of the jig as it descends. There is no way to adequately control the fall of the jig when the bail is opened on a spinner, unlike a conventional reel which allows the angler to put pressure on the spool as the jig drops. By putting pressure on the spool as it drops, the jig falls more vertically.

Third, it's difficult to impart the correct action on the jig with spinning gear because a spinning reel is much less precise than a conventional reel. Turns of the handle matter, and spinning gear does not have the control needed to do this
 
#6 ·
Several reasons. First, slow pitch is highly dependant on maintaining contact to the bottom. When you open the bail on a spinning rod it's sloppy and doesn't allow the control necessary.

The second point relates to staying vertical. Unless you are fishing with zero current or on a spankered boat, you will need to control the fall of the jig as it descends. There is no way to adequately control the fall of the jig when the bail is opened on a spinner, unlike a conventional reel which allows the angler to put pressure on the spool as the jig drops. By putting pressure on the spool as it drops, the jig falls more vertically.

Third, it's difficult to impart the correct action on the jig with spinning gear because a spinning reel is much less precise than a conventional reel. Turns of the handle matter, and spinning gear died not have the control needed to do this
Alrighty then. Guess I'm going conventional!
So what's a good rod/reel combo? I know nothing about conventional. Only have 1 convetional setup for freshwater swimbaits.
 
#9 ·
Benny,

How many you think know what a spankered boat is? Lol

BTW, shouldn’t the OP first select the lure weight, depth and current before selecting a rod? Jigging the rips up north isn’t the same as Jigging the sound/bay and most stripers are found in 30ft or less. Completely different fishery to Florida. Heart of summer I think they go deep but I never tried that fishery.

Will say this. During the spring run in the Hudson they stack up and should be vulnerable to Jigging. We did sandworms and most others did eels. Eels on a jig head?
 
#27 ·
:confused::confused:
Will say this. During the spring run in the Hudson they stack up and should be vulnerable to Jigging. We did sandworms and most others did eels. Eels on a jig head?
Maybe stick to offering advise on fish you actually fish for.
FALL is the time for jigs, NOT the spring, you got it backwards, AS USUAL.
In the spring water temps are cool, fish are on soft baits,
not chasing metal. But I defer to your expertise living in Miami
about striped bass, while I only have a view of the lower Hudson
from my window.

Few points to consider on striped bass.
Much of the fishing over unobstructed bottom. Unlike our bottom oriented fish which like to go stick their head in a rock.
Please STOP, you don't have the slightest clue what you are talking about.
Striped bass are not structured oriented, LMAO LMAO o_Oo_O:rolleyes::eek::confused::mad:

Again, you are offering advise on a fish you don't actively fish for,
and obviously have no clue what the fuck you are talking about.
Good read any book on striped bass, and learn something about
the fish you want to offer advise on, since you prove you lack
any real world experience or clue how to fish for them properly.

But again, I will defer to your expertise.
My 3 first place finishes in FLW tournaments,
at $50k each, for striped bass,
probably don't equal with your vast experience
and knowledge with striped bass.

And lets not forget, according to you,
there are no bunker north of NJ either,
wonder what they eat in MA or ME.

Not around for a week,
and the clowns are out in full force
doing their clown show.
 
#15 ·
Few points to consider on striped bass.

Guys have been bouncing diamond jigs (the original center weighted fake fish made of lead) for almost a century. Much in 30 feet or less.

Stripers mostly feed on bottom.

Like slow presentations. Soon as you go quick it’s all bluefish.

Much of the fishing over unobstructed bottom. Unlike our bottom oriented fish which like to go stick their head in a rock. On a boat light tackle very doable for striped bass.

Freshwater bass fisherman either created this technique or adopted from another fishery (as most do) of dropping jigs on spinners because with a fixed spool and rod pointed at lure there’s less resistance then with revolving spool. Also no backlash with ultralight gear.

If you’re fish 30ft or less and targeting the bottom then moving a bait to far through the water column may not be best. Part of what makes SPJ alluring is the light weight of the gear used. One could get a regular carbon/graphite composite rod with a 3/0 size round reel and bounce 2-4oz lead objects with much ease.

I agree convention reels are much better for holding bottom but there’s more than one way to skin a cat and if the main goal is to turn s handle to load a rod so the rod springs an object than spinning could be an option. Not perfect. But then nothing ever is.

Back to striped bass and slow presentations. I’d think finding a rod who’s lure range top end is closest to the weight being fished will present the slowest presentation as it will bend that rod the furthest and result in less snappy spring. At the lighter end you’d get the opposite. Probably best for bluefish.

No such thing as one answer. I always take all the variables and then select rod and reel to meet that demand. NE stripper fishing much different than south Florida and not even close to Japan fishing deep because near shore depleted from over fishing.

One last note. Stripers stay in the wake of bunker schools being marauded by bluefish picking up fluttering aftermath. I’d think that would a great opportunity to flutter a piece of lead.
 
#31 ·
What do I know. I've only been chasing striped bass since I was 8 years old. Most of my life living right next to the Hudson. From where I played basketball. It was our backdrop.
Of course you haven't lived in NJ for a few decades.
PS. looking at a river while playing basketball,
does not count towards fishing experience.
Image

:):p:cool: