Power Arm NS113

Discussion in 'Tackle and Rigging' started by explorer, May 13, 2020.

  1. explorer

    explorer Member

    625
    167
    Hi ALL,

    any members tried Jigging Master NS113 power arm on 2008 StellaSW10000? Wondering if it will fit. Having a hard time finding the NS103 but found a NS113.

    thank you
     
  2. a1flyfishr

    a1flyfishr Retired Member Supporting Member

    4,301
    1,052
    Hi San hope this will help. C259DA24-452C-40D0-8AC8-964AA8928B5A.jpeg
     
    explorer likes this.

  3. explorer

    explorer Member

    625
    167
    When was this published?

    When they stated “SHIMANO New Stella SW8000-10000” Is that 2008 model?

    not sure if 2008 vs 2013 (and later models) all of their Power Arm are interchangeable:cool:
     
  4. a1flyfishr

    a1flyfishr Retired Member Supporting Member

    4,301
    1,052
    explorer likes this.
  5. explorer

    explorer Member

    625
    167
    :p:p This might have a higher chance:D


    Will a 2008 SWStella10000 handle able to screw on to 2013 SWStella8000-10000 (or Vice versa)?:)

    I try to find the 2013 systematic but so far no luck yeto_O .....found Japanese version one though
     
  6. a1flyfishr

    a1flyfishr Retired Member Supporting Member

    4,301
    1,052
    Did you try here? Them seem to have various years and models.

    https://schematics.mikesreelrepair.com/thumbnails.php?album=25&page=8

    Benny
     
    explorer likes this.
  7. explorer

    explorer Member

    625
    167
  8. mandaragat

    mandaragat Member

    209
    59
    Yup. 2008 8000SWPG arm to 2013 10000SWBPG
     
    explorer likes this.
  9. explorer

    explorer Member

    625
    167
    PM sent
     
  10. mandaragat

    mandaragat Member

    209
    59
    8000swpg - 75mm
    SOM - 80mm (solid threaded)
    20000swpg - 85mm
    20000swbpg - 90mm (better torque)

    They are all interchangeable
     
    jcho likes this.
  11. explorer

    explorer Member

    625
    167
    Hmmm.... not too much longer than the 10000 huho_O . Mine is about 85-87 I would say. Hard to measure with the bend.




    85BA6936-DE4D-4743-A77A-145A05962B3A.jpeg
     
  12. Lilmie28

    Lilmie28 Member

    13
    4
    Yes they can be used interchangeably.
     
    explorer likes this.
  13. explorer

    explorer Member

    625
    167
    Found what I was looking for NS103 but these don’t have the “screw on screw(or whatever you call them)” I saw all from Buy&Sell forum they all comes with that, scratching my head again:eek: E78B0448-C470-4FC3-BB6F-DE48E22F68DC.jpeg
     
  14. Lilmie28

    Lilmie28 Member

    13
    4
    How to attach to reel??
     
  15. explorer

    explorer Member

    625
    167
    Still scratching me head like I said.......
     
  16. jiggingnut

    jiggingnut Junior member

    307
    96
    I don’t know much about that particular handle, but it appears to be missing the bolt that screws into the Drive gear of Stella. Unless you have the model that is designed for Daiwa which has the female end for connecting into the male threaded part of the reel’s drive gear. Look inside the hooded part and see if it has a male or female threaded part. Or take a picture of it and post it here.
     
    explorer likes this.
  17. a1flyfishr

    a1flyfishr Retired Member Supporting Member

    4,301
    1,052
    Not sure how or if the screw comes out but, can you use the screw from your original handle?

    Benny
     
    explorer likes this.
  18. explorer

    explorer Member

    625
    167
    I will pass on this one..... don’t feel right buying to “try” if it will work with the original screw.