360 Tuna Fishers Forum banner
1 - 9 of 9 Posts

·
Senior Member
Joined
·
453 Posts
here's the rebuild post. 113h/114h senator - short version go to your local shop or to pennparts.com to order parts. you can also get cal's grease and corrosion x. make sure you get in there with a greasy toothbrush to clean off all of the chrome. you don't want the pitting to get too deep. congratulations! alan
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #4 ·
Thanks Alan,

A few quick questions, any idea how old it is?

Any idea if it's a 3 or 5 washers in the drag? can it be upgraded or downgraded? which one is better?

Anything you would always replace when doing a rebuild? drag? dog? springs? I don't want to do a rebuild every year :D
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #6 ·
I'll keep that in mind spineyman. I'm a firm believer that you can't learn unless you do things yourself
 

·
Premium Member
Joined
·
1,107 Posts
Try super smoothie drag washers. If you want to change the gearing try the newell ss 4.1 gears.


this one is over 20yrs. old.
 

Attachments

·
Senior Member
Joined
·
453 Posts
a new 5 stack drag kit and a #6-875 washer under the gear should work just fine. everything else should be ok. alan
 
1 - 9 of 9 Posts
Top