Painting poppers

Discussion in 'Jigging and Popping' started by Bellyups, Mar 12, 2009.

  1. Bellyups

    Bellyups Senior Member

    1,025
    7
    I want to paint the bottom of a few lures black. Any paint tips, prep tips, etc? I was thinkin about just sanding off some of the old paint and slapping a black paint onto the bottom of the lure. Do you need to place polyeurethane over the paint when done?

    Scott
     
  2. LST-Ray

    LST-Ray Junior member

    20
    0
    I would apply masking tape to isolate the area that you want to paint. I would then lightly sand/scuff the area to paint. If there is paint missing light coat of spray primer then top coat with spray Rustoleum or equivalent. I would then apply a "clear coat" with spray Rustoleum clear or equivalent. Remove the tape and your ready to go.

    These are Black & Red ...
     

    Attached Files: