Okuma Komodo 471 handle

Discussion in 'Reel Repair' started by Tystorm, Nov 25, 2020.

  1. Tystorm

    Tystorm New Member

    4
    0
    I had my handle knob come off while underway and the hardware is gone. I found the foam knob but the screws for it are gone. The handle itself is still on the reel. I’m looking for a replacement and not having any luck. Either the stuff to fix what I have or a replacement knob aftermarket, I’m not too picky. Can anyone point me in the right direction?
     
  2. a1flyfishr

    a1flyfishr Retired Member

    4,719
    1,408

  3. Eakf

    Eakf Member

    14
    18
    I replaced my stock paddle handle with the gomexus 75mm carbon fiber power handle with knob. If I recall, it was 25 bucks or so. Knob needed a smidge of blue lock tite on the outside half as it kept loosening. It felt good jigging redfish at the jetties. I also got a 95mm tbar handle to try, but havent fitted it yet. Its an 8x5mm hole for the handle shaft, supposedly the okuma tesoro handle works well too.