360 Tuna Fishers Forum banner
1 - 9 of 9 Posts

·
Senior Member
Joined
·
230 Posts
Discussion Starter · #1 ·
i have a calstar gf 7460m that was cut down to a 5'8 rod.its pretty stout but my question is how do i place the guides either in a spiral or acid wrapped or regular guides or maybe rollers.what do you guy suggest i should do with this blank.i need some help soon i putting a parts list together.
 

·
Site Sponsor
Joined
·
4,162 Posts
any combo will work.
its your rod.
build it the way you want.

i would probably throw a set of W/T rollers on it.
but i have them laying around.
 

·
Senior Member
Joined
·
230 Posts
Discussion Starter · #3 ·
i don't do alot offshore fishing but since i have this sweet blank i don't know what to get.
 

·
Site Sponsor
Joined
·
4,162 Posts
you asked what we suggest you do with the blank...
if you arent going to use it much..
why spend mony on parts?..
sell it..thats the best advice...

if you build.

Look at the rail rod i did.

do the same thing without using the rail grip.

aftco seat
aftco gimbal
eva grips.
HBSG fuji acid wrapped.

hope that helps.
 

·
Senior Member
Joined
·
857 Posts
you asked what we suggest you do with the blank...
if you arent going to use it much..
why spend mony on parts?..
sell it..thats the best advice...

if you build.

Look at the rail rod i did.

do the same thing without using the rail grip.

aftco seat
aftco gimbal
eva grips.
HBSG fuji acid wrapped.

hope that helps.


seconds that if your not gonna use it sell it... buy something you will use
 

·
Senior Member
Joined
·
230 Posts
Discussion Starter · #9 ·
ok guys i'm going to do a acid wrapped rod with this bada** blank.i'll post pics soon.............
 
1 - 9 of 9 Posts
Top