Blackhole Cape Code 350

Discussion in 'Kilsong's Jigging World' started by ticoman, May 17, 2014.

  1. jureal

    jureal Senior Member

    1,183
    155
    It is typical for a spinning to have less guides. Even acid wrap can have one less guide because the guides are on the bottom of the rod but not so much in this short of a rod. Your factory schematic shows 4 guides plus a tip which is the same as the photo on your website with the angler bending the rod. Sometimes less is better....ie less weight.
     
  2. ticoman

    ticoman Member

    542
    25
    thats weird

    ok can you pls advise how long the rod over the first grip ?

    i cant figure out from the chart , so pls advise starting from the wind check what is the length till the top
     

  3. jureal

    jureal Senior Member

    1,183
    155
    Handle = 719mm
    Blank length= 1574.8mm
    Blank length from winding ck to tip= 1574.8mm - 719mm = 855.8mm
    Note: the spinning setup calls for 4 guides plus a tip (MNST = tip)
    Measure your guide placement downward from the tip based on the chart.
    You should end up with approx. +/- 138mm between the winding ck and the stripper guide depending on actual placements.
     
    ticoman likes this.
  4. ticoman

    ticoman Member

    542
    25
    any one knows the tip size for this rod i mean tube size
    i miss ordered 2 wrong tips
    I cant see it

    thx
     
  5. Niloticus1

    Niloticus1 Member

    119
    5
    Hi Kim,

    will ask in my thread also, but as we're discussing ringing the BH350, can you please advise ringing if keeping the blank at a full 5' 8" for a spinner please?

    Cheers

    Dave
     
  6. ticoman

    ticoman Member

    542
    25
    Kilsong seem too busy , we need to know space between tip and 3rd guide picture do not show it
     
  7. Irish Jigger

    Irish Jigger Member

    90
    2
    Distance from tip to 3rd guide is 485mm and tip guide is MNST 10H 4.5 which is 4.5mm bore according to the second drawing.
     
  8. ticoman

    ticoman Member

    542
    25
    Thanks Irish ,, so kind of ya