OTI 80 lb. spinner prototype

STx Fisherman · 07-29-2007, 07:40 PM

DBG (Tom) and Minnow (TJ) dropped by my house this morning so that we could check out the 7.5 ft. OTI 80 lb. spinning rod prototype. Attached are a couple of pics.

We later met up with Snagged, Etan, Ragman, and had lunch in Port Aransas. We got to check out the OTI 7.5 ft. 50 lb. prototype...(I like that one for poppers). They are both very well built and very strong rods. We also went to check out a World Cat 330TE ... I might be snagged.....very nice boat.

thenewkid · 07-29-2007, 08:51 PM

nice house!!!!!!! omg i almost forgot to look at the rod that tv kinda got me off subject my god thats huge.. but very nice cant wait to get my hands on that rod

Earl · 07-30-2007, 10:24 PM

Nice rod! You gotta bring that on a trip I can try it on TJ!

Thanks again Richard for letting my son and I fish at your place the other night. Even though we didn't catch alot we had a fun time. I'd love to see it sometime when you can just see the trout swimming in the greenlight

Earl

Ratherbfishing · 08-02-2007, 07:03 AM

Hey Minnow Under your screen name I notice you live in richardson. I live in rowlett, Im going on a 60hr tuna trip on aug 11. I would like to stop by and checkout your rods. Im looking to pick up one soon. Thanks Tony

stickbom · 08-15-2007, 05:15 AM

Guys, I noticed that the prototype comes fitted with high frame (HV) guides. Any particular reason why? Trouble is, they have a bad habit of collapsing when your braids get caught in it during casting. The high frames also take up a lot of space in rod tubes when travelling! Maybe you can consider MN frame guides for the production model? Just a suggestion

Minnow · 08-15-2007, 07:29 AM

STickbom,

We were just testing with different guides, production rods will have Fuji MN frame.
Thanks for your suggestion.

stickbom · 08-15-2007, 09:04 AM

Thanks for the heads up Minnow. The rod looks really promising and the bend looks nice in the photo too! All the best for your rod's acid test

lite-liner · 08-24-2007, 10:22 AM

Hey TJ, any chance the 80#, 7.5', butt-joint prototype
will be available in a conventional version?
Trying to find something for that Accurate I bought

something for pitching bait/lite iron.
-Brian

ksong · 08-24-2007, 10:36 AM

Quote:

Originally Posted by lite-liner

Hey TJ, any chance the 80#, 7.5', butt-joint prototype
will be available in a conventional version?
Trying to find something for that Accurate I bought

something for pitching bait/lite iron.
-Brian

That is why I ordered two 7.5' 80 lbs blanks when tj posted. One for spinning and one for conventional. As airline regulations are getting tougher, they don't accept free check-in luggage longer than 7' anymore on most airlines.

07-29-2007, 08:51 PM	#2 (permalink)
thenewkid Senior Member Join Date: Jun 2007 Location: ct Posts: 236	nice house!!!!!!! omg i almost forgot to look at the rod that tv kinda got me off subject my god thats huge.. but very nice cant wait to get my hands on that rod __________________ ~Tony~ You're not drunk if you can lie on the floor without holding on. A man's got to believe in something. I believe I'll have another drink.

08-15-2007, 05:15 AM	#5 (permalink)
stickbom Junior member Join Date: Nov 2006 Posts: 19	Why HVSGs? Guys, I noticed that the prototype comes fitted with high frame (HV) guides. Any particular reason why? Trouble is, they have a bad habit of collapsing when your braids get caught in it during casting. The high frames also take up a lot of space in rod tubes when travelling! Maybe you can consider MN frame guides for the production model? Just a suggestion

08-24-2007, 10:22 AM	#8 (permalink)
lite-liner Senior Member Join Date: May 2006 Location: little elm, tx., USA Posts: 472	OTI 7'5" prototypes Hey TJ, any chance the 80#, 7.5', butt-joint prototype will be available in a conventional version? Trying to find something for that Accurate I bought something for pitching bait/lite iron. -Brian

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-30-2007, 10:24 PM	#3 (permalink)
Earl Member Join Date: Jul 2007 Posts: 74	Nice rod! You gotta bring that on a trip I can try it on TJ! Thanks again Richard for letting my son and I fish at your place the other night. Even though we didn't catch alot we had a fun time. I'd love to see it sometime when you can just see the trout swimming in the greenlight Earl

08-02-2007, 07:03 AM	#4 (permalink)
Ratherbfishing Member Join Date: Aug 2007 Posts: 35	Hey Minnow Under your screen name I notice you live in richardson. I live in rowlett, Im going on a 60hr tuna trip on aug 11. I would like to stop by and checkout your rods. Im looking to pick up one soon. Thanks Tony

08-15-2007, 07:29 AM	#6 (permalink)
Minnow Administrator Join Date: May 2006 Location: Richardson Posts: 1,134	STickbom, We were just testing with different guides, production rods will have Fuji MN frame. Thanks for your suggestion.

08-15-2007, 09:04 AM	#7 (permalink)
stickbom Junior member Join Date: Nov 2006 Posts: 19	Thanks for the heads up Minnow. The rod looks really promising and the bend looks nice in the photo too! All the best for your rod's acid test

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)