Stella 16000 Drags - Page 3

PurEvl · 05-19-2008, 06:47 PM

Quote:

Originally Posted by gman

spool looks familiar

That drag setup looks exactly like mine but the drags look thicker.

jureal · 05-19-2008, 07:07 PM

No issues so far with the retaining clip. It is under the drag adjustment knob which keeps it in place during usage. I assume that the retaining clips only function when the spool is not mounted onto the reel with the knob in place.

PurEvl · 05-19-2008, 07:15 PM

Thanks, that's good to know that there are no fitment issues.

Sportfisherman · 05-19-2008, 07:55 PM

Quote:

Originally Posted by jureal

Interesting. Up to a while ago, Smoothies did have drags listed for the Stella 16000. I called Dawn up and asked her why they only listed a three stack where my 16000 had a 4 stack. She did not know why but she sent me 4 washers instead of the 3.... no extra costs. When I went to install them, I found that the washers were thicker than the stock.... the od and id was correct but the extra thickness made it impossible to get the four washers in under the spring retainer clip. I just used all four washers anyways and moved the retainer clip up into the next slot up. Of course, the retainer clip needed to be openned up a bit so that it would not just lay there. For now it works but my thoughts are that Dawn removed the washers from the web site due to the problem with the thickness. Just a thought.

Hi ,

To be able to put 4 stacks , order the carbontex drag washer in 0.6 mm thick .

Jon .

PurEvl · 05-19-2008, 08:10 PM

Thanks guys, I emailed Dawn and let her know the situation. She has already mailed me some drags to try out and will let you guys know when I get them what I end up doing.

Whats the difference between having a 3 stack drag opt to 4 stack drag system?

Alan - I am guessing the OD of the drag is 25mm as sportfisherman has fit that size in his Stella.

gman · 05-19-2008, 08:46 PM

Quote:

Originally Posted by PurEvl

That drag setup looks exactly like mine but the drags look thicker.

I sold Anthony that spool ha ha

txseadog · 05-19-2008, 09:05 PM

I'm not an engineer but the 3 stack has 25% less surface area than the 4 stack so I would think the usable drag would decrease at the same ratio.

Quote:

Originally Posted by PurEvl

Whats the difference between having a 3 stack drag opt to 4 stack drag system?

PurEvl · 05-19-2008, 09:26 PM

Quote:

Originally Posted by txseadog

I'm not an engineer but the 3 stack has 25% less surface area than the 4 stack so I would think the usable drag would decrease at the same ratio.

I told Dawn to send me some of the drags you recommended Jon so I can try to run 4 stack.

PurEvl · 05-22-2008, 05:20 PM

The drags came in today, first I did 3 stack and it had a little too much play in the drag stack so I did the 4 stack. I did have to move the retainer up. Haven't had the chance to test the drags to make sure everything is smooth and nothing is binding yet but just by turning the spool by hand with a bit of drag applied it feels good good.

05-19-2008, 08:10 PM	#25 (permalink)
PurEvl Senior Member Join Date: Nov 2007 Posts: 394	Thanks guys, I emailed Dawn and let her know the situation. She has already mailed me some drags to try out and will let you guys know when I get them what I end up doing. Whats the difference between having a 3 stack drag opt to 4 stack drag system? Alan - I am guessing the OD of the drag is 25mm as sportfisherman has fit that size in his Stella. Last edited by PurEvl : 05-19-2008 at 08:13 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-19-2008, 07:07 PM	#22 (permalink)
jureal Senior Member Join Date: Oct 2007 Posts: 215	No issues so far with the retaining clip. It is under the drag adjustment knob which keeps it in place during usage. I assume that the retaining clips only function when the spool is not mounted onto the reel with the knob in place.

05-19-2008, 07:15 PM	#23 (permalink)
PurEvl Senior Member Join Date: Nov 2007 Posts: 394	Thanks, that's good to know that there are no fitment issues.

05-22-2008, 05:20 PM	#29 (permalink)
PurEvl Senior Member Join Date: Nov 2007 Posts: 394	The drags came in today, first I did 3 stack and it had a little too much play in the drag stack so I did the 4 stack. I did have to move the retainer up. Haven't had the chance to test the drags to make sure everything is smooth and nothing is binding yet but just by turning the spool by hand with a bit of drag applied it feels good good.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)