basic penn rebuild - 113h, 114h, jigmaster

[fishr1989]

what's the max drag on the jigmaster, and does smooth drag sell a full set of washers for it?

[Lumberjack93]

Originally Posted by Dorymate2530

I don't know if this was discussed before but the L means light and refers to the aluminuim spool that Alan observed and I believe this is the only difference.

Nice Post!!!!

Here is a little information about the Penn 114HL 6/0

I own this reel and it's a beast. Mine has an aluminium reel frame on the bottom. It's made of solid aluminium. I was talking to a guy at Penn one time and he told me to hang onto this reel. Penn made this reel for a very short time due to the expense of the reel.

I'll take some pics of mine and post it on here. I was told that the true HL's are somewhat rare.

LJ93

[Dorymate2530]

I have two 114HL senators and you're right they are good reels. Mine have aluminum frames front and rear but they are not tied into the reel seat. The two I have also have aluminum spools but the reel seat is not aluminum. Sounds like you have a rare reel there and would love to see pictures of it.

[alantani]

Originally Posted by fishr1989

what's the max drag on the jigmaster, and does smooth drag sell a full set of washers for it?

max drag attainable on these three drag systems should be about 15 pounds. reels in this class include the penn jigmaster, 3/0 senator, long beach 60, 7 series internationals, and all of the smaller newells.

Pricing Information, SMOoOTH DRAG *** Can Stop Anything *** Toll Free: 888-206-4656 does have a drag set for the jigmaster. go with carbontex, not the black or green smoothies, or stick with carbon fiber penn ht-100's.