AveT 30 Corrosion Proofing

ALW · 05-06-2007, 11:19 AM

Alantani

Any recommendations on corrosion proofing an AVET Pro 30 2 speed. I took the screws out on the outside of the reel and coated them with nickle base Never Sieze. Sprayed with Corrosion X. Afraid to go inside, it looks like a watch in there.

Al

alantani · 05-06-2007, 01:56 PM

al, i actually have a pro 30 in the garage to go through. i'm guessing it's going to be the same as the ex 4/0. the bearings are at greatest risk. never seize should be ok, but i still prefer yamaha engine grease. don't forget the reel seat and rod clamp bolts. and make sure everything is properly torqued down. alan

ALW · 05-06-2007, 04:30 PM

Thanks. Is there any thing to be done inside the reel?

Al

alantani · 05-06-2007, 05:22 PM

yeah, lots!

avet ex 4/02 rebuild

05-06-2007, 11:19 AM	#1 (permalink)
ALW Senior Member Join Date: Jul 2006 Posts: 129	AveT 30 Corrosion Proofing Alantani Any recommendations on corrosion proofing an AVET Pro 30 2 speed. I took the screws out on the outside of the reel and coated them with nickle base Never Sieze. Sprayed with Corrosion X. Afraid to go inside, it looks like a watch in there. Al

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-06-2007, 01:56 PM	#2 (permalink)
alantani Senior Member Join Date: Jan 2007 Location: saratoga, ca Posts: 180	al, i actually have a pro 30 in the garage to go through. i'm guessing it's going to be the same as the ex 4/0. the bearings are at greatest risk. never seize should be ok, but i still prefer yamaha engine grease. don't forget the reel seat and rod clamp bolts. and make sure everything is properly torqued down. alan

05-06-2007, 04:30 PM	#3 (permalink)
ALW Senior Member Join Date: Jul 2006 Posts: 129	Thanks. Is there any thing to be done inside the reel? Al

05-06-2007, 05:22 PM	#4 (permalink)
alantani Senior Member Join Date: Jan 2007 Location: saratoga, ca Posts: 180	yeah, lots! avet ex 4/02 rebuild

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)