The Ultimate Milkcrate

[Gunsmoke]

Below are some pictures from my newly fabricated "Ultimate Milkcrate." It measures 21" x 24" x 12" without handles. 21" x 29 1/2" x 12" with handles. It weights in at 206 pounds. If anyone is interested, I can post pictures of it during the fabrication process.

It is designed to hold 7 rods. The back side with 3 rod holders will hold up to 50W's. The front side with 4 rod holders will hold up to 30's. I designed it to take on long range tuna trips. I figure I need one 50W, one 30W, two jigging outfits, two large spinning outfits, and one bait rod.

Stainless steel eye hooks are behind the rod holders to secure the rods with bungee cords. Stainless steel screws were used throughout the fabrication. It should not move or shift no matter what size seas it will encounter. The rubber feet are solid 1 3/4" thick rubber. Handles will support 500 pounds each. Lee 90 degree medium size rod holders were selected because they are the most proven holder on the market. It is completely fiberglassed and coated with five coats of white epoxy paint.

The core of the crate is constructed with a buildup of 1 1/2" of 12 ply plywood. The plywood core was filled with concrete to gain some weight. I will need someone to help me lift this beast onto the boat. It's one very well constructed heavy milkcrate that will not have to be tied down to the deck. It should not shift or move what so ever.

[bunile]

That's going to need bigger handles for MR. BILL 's side!!! Funny, in the picture's it don't look that heavy, what kind of lens is on that camera?, My wife wants to know....HA!