Putting Braid on a Reel

bighead · 11-06-2006, 12:37 PM

I seem to remember there can be problems with slipping if this is not done right. I've heard that you should put a couple of wraps of electrical tape on the spool to start. Anybody know the right way to get the line attached? Bert

Minnow · 11-06-2006, 12:58 PM

I use vet-wrap at the spool, tie 3ft bimini twist. Use your double line and tie offshore swivel knot at the spool. JMO

Brewgod · 11-06-2006, 02:21 PM

Scotch tape, why get complicated?

Minnow · 11-06-2006, 06:40 PM

Welcome aboard brewgod.

There are many ways to spool line into reel, this is just my way.
I have only been spooled by UFO once and I learned my leason.

Dr Jeff · 11-06-2006, 06:52 PM

Minnow:w/that connection,I hope someone had a leash on you!LOL BTW: I still haven't gotten my big Fin-Nor yet.

txseadog · 11-06-2006, 07:16 PM

[quote=Minnow]
There are many ways to spool line into reel, this is just my way. /QUOTE]

I use about 6' of 100 dacron with loops sliced into both ends.

xs_tackle · 11-11-2006, 11:58 AM

There may be no right way; but, there are some things to think about:
--1. How strong does it have to be; diff answers for 40# and 130#
--2. Is the spool scored or does it have a pin/stud in it--if so, fewer traction issues
--3. There are credible, left coast stories of vetwrap slipping and electrical tape turning gooey, oozing and slipping with heat/age.
--4. Some very picky guys report beginning by tying on short underwraps of either dacron or mono; and, some even splice the spectra to the dacron or insert mono into the spectra 6-8 ft and then JB glue it.
--5. Just as impt as how you attach it to the spool is laying it in straight and loading it w/constant tension of about 5-7lbs. I load line first to a large offshore reel then load from that onto the target reel, using the drag of the first reel. However, doing it this way, you will find (maybe no surprise) that torque is constant but line tension is not. You have to monitor the drag setting to keep line tension w/in the target range. Doesn't have to be too precise;you can tell when line tension has changed significantly (3-4 changes while loading a Penn Intl 30).
--6. Do not set tension on spectra by pinching the line with your fingers (w/ or w/o gloves or water or towel). This generates heat which can damage spectra.
--7. Trust a tackle store hand to do it, only if you would trust him/her to tie your knots.

11-06-2006, 12:37 PM	#1 (permalink)
bighead Senior Member Join Date: May 2006 Posts: 225	Putting Braid on a Reel I seem to remember there can be problems with slipping if this is not done right. I've heard that you should put a couple of wraps of electrical tape on the spool to start. Anybody know the right way to get the line attached? Bert

11-06-2006, 06:52 PM	#5 (permalink)
Dr Jeff Member Join Date: Aug 2006 Posts: 34	Minnow:w/that connection,I hope someone had a leash on you!LOL BTW: I still haven't gotten my big Fin-Nor yet. Last edited by Dr Jeff : 11-06-2006 at 06:59 PM.

11-11-2006, 11:58 AM	#7 (permalink)
xs_tackle Senior Member Join Date: Nov 2006 Posts: 216	There may be no right way; but, there are some things to think about: --1. How strong does it have to be; diff answers for 40# and 130# --2. Is the spool scored or does it have a pin/stud in it--if so, fewer traction issues --3. There are credible, left coast stories of vetwrap slipping and electrical tape turning gooey, oozing and slipping with heat/age. --4. Some very picky guys report beginning by tying on short underwraps of either dacron or mono; and, some even splice the spectra to the dacron or insert mono into the spectra 6-8 ft and then JB glue it. --5. Just as impt as how you attach it to the spool is laying it in straight and loading it w/constant tension of about 5-7lbs. I load line first to a large offshore reel then load from that onto the target reel, using the drag of the first reel. However, doing it this way, you will find (maybe no surprise) that torque is constant but line tension is not. You have to monitor the drag setting to keep line tension w/in the target range. Doesn't have to be too precise;you can tell when line tension has changed significantly (3-4 changes while loading a Penn Intl 30). --6. Do not set tension on spectra by pinching the line with your fingers (w/ or w/o gloves or water or towel). This generates heat which can damage spectra. --7. Trust a tackle store hand to do it, only if you would trust him/her to tie your knots. Last edited by xs_tackle : 11-11-2006 at 12:05 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-06-2006, 12:58 PM	#2 (permalink)
Minnow Administrator Join Date: May 2006 Location: Richardson Posts: 1,198	I use vet-wrap at the spool, tie 3ft bimini twist. Use your double line and tie offshore swivel knot at the spool. JMO

11-06-2006, 02:21 PM	#3 (permalink)
Brewgod Junior member Join Date: Jun 2006 Posts: 17	Scotch tape, why get complicated?

11-06-2006, 06:40 PM	#4 (permalink)
Minnow Administrator Join Date: May 2006 Location: Richardson Posts: 1,198	Welcome aboard brewgod. There are many ways to spool line into reel, this is just my way. I have only been spooled by UFO once and I learned my leason.

11-06-2006, 07:16 PM	#6 (permalink)
txseadog Super Moderator Join Date: May 2006 Location: tx Posts: 327	[quote=Minnow] There are many ways to spool line into reel, this is just my way. /QUOTE] I use about 6' of 100 dacron with loops sliced into both ends.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)