Gear question

Depraved · 09-01-2008, 11:46 AM

i got a penn torque 300 spooled with 65lb braid and a calstar 700h

what do you think the limits of this gear can handle?

i usually use it for bottom fishing but will it work well for jigging/chunking?

paul708 · 09-01-2008, 11:52 AM

should be good
alot of guys use that setup for tuna up here

Depraved · 09-01-2008, 04:54 PM

Quote:

Originally Posted by paul708

should be good
alot of guys use that setup for tuna up here

thanks

Mitchw123456 · 09-01-2008, 05:37 PM

My torque 300 with a 700XH has landed several tuna up to 80#s with no problems.

09-01-2008, 11:46 AM	#1 (permalink)
Depraved Junior member Join Date: Aug 2008 Posts: 22	Gear question i got a penn torque 300 spooled with 65lb braid and a calstar 700h what do you think the limits of this gear can handle? i usually use it for bottom fishing but will it work well for jigging/chunking?

09-01-2008, 11:52 AM	#2 (permalink)
paul708 Senior Member Join Date: Feb 2007 Location: Pa Posts: 411	should be good alot of guys use that setup for tuna up here __________________ northeast coast OTI sales specialize in custom OTI Jigging and popping rods and fine OTI jigging products Jigging Master custom rods jprrods.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-01-2008, 05:37 PM	#4 (permalink)
Mitchw123456 Senior Member Join Date: Oct 2006 Posts: 247	My torque 300 with a 700XH has landed several tuna up to 80#s with no problems.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)