Avet HX line capacity... More than I expected

DeepBlueGulf · 11-02-2007, 01:20 AM

Hey Guys,

I just got finished moving 600 yards of 80lb JB Hollow from a TLD20II to an Avet HX! I never would have guessed it could hold that much, but it did! No room for a topshot though, it's full to the brim! Had to hand crank it from one rig to the other, now I'm having cramps in my left arm, and blisters on my right hand! LOL!

If a fish ever takes me down to the knot, I'm throwing that rig into the drink!

Tom - DBG

jaredchasteen · 11-02-2007, 01:22 AM

Quote:

Originally Posted by DeepBlueGulf

Hey Guys,

I just got finished moving 600 yards of 80lb JB Hollow from a TLD20II to an Avet HX! I never would have guessed it could hold that much, but it did! No room for a topshot though, it's full to the brim! Had to hand crank it from one rig to the other, now I'm having cramps in my left arm, and blisters on my right hand! LOL!

If a fish ever takes me down to the knot, I'm throwing that rig into the drink!

Tom - DBG

dont fish with gunsmoke he will throw it in the drink before that.

Gunsmoke · 11-02-2007, 11:53 AM

Quote:

Originally Posted by jaredchasteen

dont fish with gunsmoke he will throw it in the drink before that.

CORRECT!!!!!!!!!!!

shanker · 11-03-2007, 09:01 AM

Quote:

Originally Posted by jaredchasteen

dont fish with gunsmoke he will throw it in the drink before that.

I might have to toss him in to retrieve an HX though...

EVIL:

MrBill · 11-03-2007, 10:48 AM

Quote:

Originally Posted by shanker

I might have to toss him in to retrieve an HX though...

EVIL:

That would be an interesting thing to witness.

DBG,

This below might help you in your future line estimates.

Common Line Diameters (inches)
Mono
10# 0.012
12# 0.014
15# 0.015
20# 0.018
25# 0.019
30# 0.022
40# 0.024
50# 0.028
60# 0.030
80# 0.035
100# 0.039
125# 0.044
150# 0.056

Braid
10# 0.006
20# 0.009
30# 0.011
50# 0.014
65# 0.016
80# 0.017
100# 0.018
150# 0.022
200# 0.030
250# 0.035

ksong · 11-03-2007, 11:47 AM

The calculation chart doesn't help much as the braided lines are nor rounded.
On the chart, the 30 lbs mono is equivalant to 150 lbs braided line, but the 30 lbs mono is equivalant to 80 - 100 lbs in fact when you spool.
Once you use the lines a few times, the braided line get tighter and you get more room on your spool.

Fishhead56 · 11-04-2007, 11:23 AM

DBG,
Was that the HX, HXW?

Anyone have thoughts on how a HXN might balance out on a OTI Jig rod
and how much less would be the spool capacity?

And lastly for some one wanting to keep Gun Smoke busy. Ebay has a set
of 4 avet 30's w\poles for the low starting bid of $2500. plus shipping.

Hurry up last day for a chance to pay list price,

fathom · 11-04-2007, 11:56 AM

hx holds 600 yds. of 80 lb. jb hollow with room for a wind on. More than enough for most fish. This is my primary conventional jigging reel. The maximum drag is around 28 lb. I am looking at the release of the new Baker 2 speeds as they are supposed to generate 40 lb. of drag!
It is rated for 550 yds. of 80lb. spectra and is 3/0 size with a weight of 36 oz. and under $500.

Bazztex · 11-05-2007, 01:57 AM

Penn also has a new Torque 300LT Lever Drag for 2008 makes 32# of drag.

DeepBlueGulf · 11-06-2007, 02:52 PM

Fishhead,

It was a regular HX, and the spectra was wound on tight, around 11lbs of drag.

Tom - DBG

11-02-2007, 01:20 AM	#1 (permalink)
DeepBlueGulf Senior Member Join Date: May 2006 Posts: 622	Avet HX line capacity... More than I expected Hey Guys, I just got finished moving 600 yards of 80lb JB Hollow from a TLD20II to an Avet HX! I never would have guessed it could hold that much, but it did! No room for a topshot though, it's full to the brim! Had to hand crank it from one rig to the other, now I'm having cramps in my left arm, and blisters on my right hand! LOL! If a fish ever takes me down to the knot, I'm throwing that rig into the drink! Tom - DBG

11-05-2007, 01:57 AM	#9 (permalink)
Bazztex Senior Member Join Date: Jul 2006 Location: DFW Metro Mess Posts: 163	Penn also has a new Torque 300LT Lever Drag for 2008 makes 32# of drag. Last edited by Bazztex : 11-05-2007 at 12:18 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-03-2007, 11:47 AM	#6 (permalink)
ksong Senior Member Join Date: May 2006 Posts: 1,378	The calculation chart doesn't help much as the braided lines are nor rounded. On the chart, the 30 lbs mono is equivalant to 150 lbs braided line, but the 30 lbs mono is equivalant to 80 - 100 lbs in fact when you spool. Once you use the lines a few times, the braided line get tighter and you get more room on your spool.

11-04-2007, 11:23 AM	#7 (permalink)
Fishhead56 Senior Member Join Date: Jan 2007 Location: Galveston County Posts: 371	DBG, Was that the HX, HXW? Anyone have thoughts on how a HXN might balance out on a OTI Jig rod and how much less would be the spool capacity? And lastly for some one wanting to keep Gun Smoke busy. Ebay has a set of 4 avet 30's w\poles for the low starting bid of $2500. plus shipping. Hurry up last day for a chance to pay list price,

11-04-2007, 11:56 AM	#8 (permalink)
fathom Senior Member Join Date: Aug 2006 Location: cedar creek Tx Posts: 262	hx holds 600 yds. of 80 lb. jb hollow with room for a wind on. More than enough for most fish. This is my primary conventional jigging reel. The maximum drag is around 28 lb. I am looking at the release of the new Baker 2 speeds as they are supposed to generate 40 lb. of drag! It is rated for 550 yds. of 80lb. spectra and is 3/0 size with a weight of 36 oz. and under $500.

11-06-2007, 02:52 PM	#10 (permalink)
DeepBlueGulf Senior Member Join Date: May 2006 Posts: 622	Fishhead, It was a regular HX, and the spectra was wound on tight, around 11lbs of drag. Tom - DBG

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)