assist hooks ?

MO1 · 09-12-2006, 01:58 PM

What size/brand hooks do y'all use ? Where are
you finding the best prices ?
For those making up thier own, what brand/size/style hook are you using?
What size Spectra line or Kevlar cord ?

Thanks

MO

SkeeterRonnie · 09-12-2006, 02:57 PM

i use 300# JB Hollow for the cord, use the highest quality hooks(live bait XXH) I can afford at the time. I usually pull them out of the packaage in the store and get the sharpest ones ( gamaktsu or owner). Up here (DFW) theres not a large selection, so I try to find a good 6/0 or 7/0 - something that is gonna stick out past the jig (wider than the jig). I make them myself with the premium hooks for ~ $1.00 each. But I have peace of mind because I know what quality went into each one. It becomes really easy to do after tying about 10 of them. takes around 10 minutes for each one. I even use kevlar thread, superglue, and then heat shrink to protect the knot even further. I make 2 sizes (long and shrt). the long one gets a orthodontist style rubberband to hold it midsection on the jig.

The next batch I will start putting tinsel and feather on the hooks under the kevlar thread. I read somewhere(i think Ksong) that there is belief the fish go for the hooks once they get close to the jig. Cant hurt, and the color and feathers are very inexpensive. (if you see any ducks without feathers around DFW, please disregard everything I have said about feathers.....lol)

feeder · 09-13-2006, 11:53 PM

Skeeter,

How do you make the loop attachments from the braid to the hook? Is it a special knot? Thought about making my own as well since $5 a package gets expensive after a few trips.

galveston1602 · 09-14-2006, 01:34 AM

Look here for a great start from randy at anglers pro shop.

http://www.texasfishingforum.com/cgi...c;f=7;t=002810

feeder · 09-15-2006, 01:52 AM

Thanks galveston. That helps a lot. I'll have to try these out and see how they work.

SkeeterRonnie · 09-15-2006, 11:21 AM

http://www.texasfishingforum.com/.ub...=002651#000000

MO1 · 09-20-2006, 11:29 AM

I have some diamond jigs left from my last
adventure. They need new hooks, would you
guys recommend going with treble or assist hooks
on these ? Or leave them home ?
MO

SkeeterRonnie · 09-20-2006, 11:52 AM

i would defiantely use assist hooks. Daimond jigs work great for blackfin.

Minnow · 09-20-2006, 01:56 PM

Melt those diamond jig and make an egg sinkers out of them J/K LOL.

Assist hooks will increases your hook up ratio but the treble hook will work as well. jmo.

09-12-2006, 01:58 PM	#1 (permalink)
MO1 Member Join Date: Jul 2006 Location: bullard tx Posts: 31	assist hooks ? What size/brand hooks do y'all use ? Where are you finding the best prices ? For those making up thier own, what brand/size/style hook are you using? What size Spectra line or Kevlar cord ? Thanks MO

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-12-2006, 02:57 PM	#2 (permalink)
SkeeterRonnie Senior Member Join Date: Jul 2006 Posts: 1,308	i use 300# JB Hollow for the cord, use the highest quality hooks(live bait XXH) I can afford at the time. I usually pull them out of the packaage in the store and get the sharpest ones ( gamaktsu or owner). Up here (DFW) theres not a large selection, so I try to find a good 6/0 or 7/0 - something that is gonna stick out past the jig (wider than the jig). I make them myself with the premium hooks for ~ $1.00 each. But I have peace of mind because I know what quality went into each one. It becomes really easy to do after tying about 10 of them. takes around 10 minutes for each one. I even use kevlar thread, superglue, and then heat shrink to protect the knot even further. I make 2 sizes (long and shrt). the long one gets a orthodontist style rubberband to hold it midsection on the jig. The next batch I will start putting tinsel and feather on the hooks under the kevlar thread. I read somewhere(i think Ksong) that there is belief the fish go for the hooks once they get close to the jig. Cant hurt, and the color and feathers are very inexpensive. (if you see any ducks without feathers around DFW, please disregard everything I have said about feathers.....lol)

09-13-2006, 11:53 PM	#3 (permalink)
feeder Senior Member Join Date: Jul 2006 Posts: 193	Skeeter, How do you make the loop attachments from the braid to the hook? Is it a special knot? Thought about making my own as well since $5 a package gets expensive after a few trips.

09-14-2006, 01:34 AM	#4 (permalink)
galveston1602 Member Join Date: Jun 2006 Posts: 37	Look here for a great start from randy at anglers pro shop. http://www.texasfishingforum.com/cgi...c;f=7;t=002810

09-15-2006, 01:52 AM	#5 (permalink)
feeder Senior Member Join Date: Jul 2006 Posts: 193	Thanks galveston. That helps a lot. I'll have to try these out and see how they work.

09-15-2006, 11:21 AM	#6 (permalink)
SkeeterRonnie Senior Member Join Date: Jul 2006 Posts: 1,308	http://www.texasfishingforum.com/.ub...=002651#000000

09-20-2006, 11:29 AM	#7 (permalink)
MO1 Member Join Date: Jul 2006 Location: bullard tx Posts: 31	I have some diamond jigs left from my last adventure. They need new hooks, would you guys recommend going with treble or assist hooks on these ? Or leave them home ? MO

09-20-2006, 11:52 AM	#8 (permalink)
SkeeterRonnie Senior Member Join Date: Jul 2006 Posts: 1,308	i would defiantely use assist hooks. Daimond jigs work great for blackfin.

09-20-2006, 01:56 PM	#9 (permalink)
Minnow Administrator Join Date: May 2006 Location: Richardson Posts: 1,234	Melt those diamond jig and make an egg sinkers out of them J/K LOL. Assist hooks will increases your hook up ratio but the treble hook will work as well. jmo.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)