aftermarket 9500 handle

etan · 10-24-2007, 05:35 AM

Where can I get one for my Penn 9500? Don't want to spend the money for a Stella just want to upgrade the Penn. Thanks!

Bret · 10-24-2007, 05:42 AM

nate, those have been hard to find. I havent looked in a while, but I ordered mine from a site overseas.. I will see if I can find it.. seems like it took me forever to find that guy...

tunacrazy · 10-24-2007, 11:18 AM

etan, studio ocean mark make a handle for the Penns but quite expensive, can be seen Angler's Pro Shop web site, good luck finding what your looking for. If you find something that you like, post it,we too use Penns Bruce

lite-liner · 10-24-2007, 11:51 AM

Nate, If you talk to Stickbom(mike) over on deepjigging.com
(I think He's here, too) he can hook you up, but be prepared.
I was gonna go that route & I think he said those killer handles
cost about $150 us, plus shp from asia. mine is now for sale,
& I've bought another Cabo to replace it. just couldn't justify
having $300+ in a used Penn spinner, when I could buy better for less
just my opinion, though
tight lines
-Brian

ksong · 10-24-2007, 11:58 AM

I think Anglers Proshop carries them.

Angler's Pro Shop

etan · 10-24-2007, 06:16 PM

Holy cow! I just wanted a different handle, not buy a new reel. Thats way too much for me. I'm just too tight! I'll just stick with what I have. Thanks for the responses. What washers do I need to upgrade the drag?

Gunsmoke · 10-24-2007, 08:13 PM

Quote:

Originally Posted by etan

Holy cow! I just wanted a different handle, not buy a new reel. Thats way too much for me. I'm just too tight! I'll just stick with what I have. Thanks for the responses. What washers do I need to upgrade the drag?

As tight as you are, you must own some duct tape. Just put some around your finger and push on the spool. That's a real cheap way of increasing drag pressure. Also, very cheap.

Etan,
Just joking with you. We all have our pet pees about being cheap. I will not ever buy a cup of coffee from Starbucks. Never have, never will. Too expensive.

etan · 10-27-2007, 10:36 AM

I agree about Starbucks! I'm the same way about bottled water, for that price I might as well drink beer. For the price of that handle I'd rather just buy another reel.

10-24-2007, 05:35 AM	#1 (permalink)
etan Senior Member Join Date: Sep 2006 Posts: 199	aftermarket 9500 handle Where can I get one for my Penn 9500? Don't want to spend the money for a Stella just want to upgrade the Penn. Thanks!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-24-2007, 05:42 AM	#2 (permalink)
Bret Senior Member Join Date: May 2006 Location: DFW Posts: 1,223	nate, those have been hard to find. I havent looked in a while, but I ordered mine from a site overseas.. I will see if I can find it.. seems like it took me forever to find that guy...

10-24-2007, 11:18 AM	#3 (permalink)
tunacrazy Member Join Date: Aug 2007 Location: Bella Vista Arkansas Posts: 59	etan, studio ocean mark make a handle for the Penns but quite expensive, can be seen Angler's Pro Shop web site, good luck finding what your looking for. If you find something that you like, post it,we too use Penns Bruce

10-24-2007, 11:51 AM	#4 (permalink)
lite-liner Senior Member Join Date: May 2006 Location: little elm, tx., USA Posts: 561	Nate, If you talk to Stickbom(mike) over on deepjigging.com (I think He's here, too) he can hook you up, but be prepared. I was gonna go that route & I think he said those killer handles cost about $150 us, plus shp from asia. mine is now for sale, & I've bought another Cabo to replace it. just couldn't justify having $300+ in a used Penn spinner, when I could buy better for less just my opinion, though tight lines -Brian

10-24-2007, 11:58 AM	#5 (permalink)
ksong SPONSOR Join Date: May 2006 Posts: 1,562	I think Anglers Proshop carries them. Angler's Pro Shop

10-24-2007, 06:16 PM	#6 (permalink)
etan Senior Member Join Date: Sep 2006 Posts: 199	Holy cow! I just wanted a different handle, not buy a new reel. Thats way too much for me. I'm just too tight! I'll just stick with what I have. Thanks for the responses. What washers do I need to upgrade the drag?

10-27-2007, 10:36 AM	#8 (permalink)
etan Senior Member Join Date: Sep 2006 Posts: 199	I agree about Starbucks! I'm the same way about bottled water, for that price I might as well drink beer. For the price of that handle I'd rather just buy another reel.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)