360Tuna - View Single Post

Bazztex · 03-14-2007, 10:08 PM

Alan

I have a Penn 30 TW that has been 2 Speeded with extra room for gear shifting provided via a spacer ring... with shifter and gears from a 30S.

I took it apart because the Drag had gotten a little weak. I bought a new Drag plate and New factory carbon fiber drag washer assy for a Penn 30TW.

After assembly with the new parts it has very little adjust Pre-Set drag adjustment before I loose Free Spool. As far as I can tell it's exactly as I took it apart on the washer stack. spacers..ect. Is it possible the drag assy spline boss is longer than the original??

Anything you can think of that might fix the problem??

Thanks... Bazz

03-14-2007, 10:08 PM	#10 (permalink)
Bazztex Senior Member Join Date: Jul 2006 Location: DFW Metro Mess Posts: 144	Alan I have a Penn 30 TW that has been 2 Speeded with extra room for gear shifting provided via a spacer ring... with shifter and gears from a 30S. I took it apart because the Drag had gotten a little weak. I bought a new Drag plate and New factory carbon fiber drag washer assy for a Penn 30TW. After assembly with the new parts it has very little adjust Pre-Set drag adjustment before I loose Free Spool. As far as I can tell it's exactly as I took it apart on the washer stack. spacers..ect. Is it possible the drag assy spline boss is longer than the original?? Anything you can think of that might fix the problem?? Thanks... Bazz Last edited by Bazztex : 03-14-2007 at 10:11 PM.