|
i have found it takes A LOT of patience working on the reels. I also found I have to double, sometimes triple check everything I have done. I think of myself as very mechanically inclined, and still have to take my time with no distractions. I disassebled and reassembled my Tiagra-16 six times to get it right. In the process I stripped out one of the sideplate bolts holes on the stock frame...luckily I got it installed in the topless frame and it works. Now I have to do it again to PROPERLY grease and oil the bearings. I would hate to have a bearing lockup due to my ignorance. Mr Alan sure opened up the spectrum with the knowledge he is offering to the forum. I printed out 35 pages of the bearing tutorial. It will be put into my binder.
|