|
remember from the 320 gti post that there are two types of penn drag washers. the thin ones, like the 320 gti and jigmaster washers, are made up of a single layer of carbon fiber. this single layer washers will not hold up underneath the main gear. the thick ones. like the 113h and 114 drag washers, have a fiberglass core with a layer of carbon fiber on either side and they will hold up! the #6-875 drag washer has the same inside diameter as the thin 320 drag and the thick 113h drag. it just has a smaller outer diameter. you could use a #6-113h drag washer underneath, or just stay with the stock fiber washer. i don't care for the fiber washers because they tend to stick a little under a heavy load.
|