360Tuna - View Single Post

Bret · 03-28-2008, 11:14 PM

Ronnie, there were some problems with some of the 80s scarabs.. they had some soft floor issues.. I would stomp around the deck and see if there are any bad spots.. You might try posting up on the hull truth or do a search and see what those guys have to say.. Words of wisdom: its a 23yr old go fast boat.. Most guys run the crap out of them.. Check the structural integrity of everything on that boat: T-top, console/deck joints, make sure all hatches close properly, look in every inspection port you can find(use a flashlight and mirror if necessary).... especially the transom area.. Check bilge pumps, flip every switch and see what works and what doesnt, trim tabs, running lights, electronics....etc....depending on price a marine survey might be the ticket if your buddy is not too boat savvy......
my grady is the same year model, and I'm the 4th owner.. I have had to do several Gs$$$$ worth of fiberglass work... but I couldnt replace it for what I have in it..

03-28-2008, 11:14 PM	#2 (permalink)
Bret Senior Member Join Date: May 2006 Location: DFW Posts: 1,180	Ronnie, there were some problems with some of the 80s scarabs.. they had some soft floor issues.. I would stomp around the deck and see if there are any bad spots.. You might try posting up on the hull truth or do a search and see what those guys have to say.. Words of wisdom: its a 23yr old go fast boat.. Most guys run the crap out of them.. Check the structural integrity of everything on that boat: T-top, console/deck joints, make sure all hatches close properly, look in every inspection port you can find(use a flashlight and mirror if necessary).... especially the transom area.. Check bilge pumps, flip every switch and see what works and what doesnt, trim tabs, running lights, electronics....etc....depending on price a marine survey might be the ticket if your buddy is not too boat savvy...... my grady is the same year model, and I'm the 4th owner.. I have had to do several Gs$$$$ worth of fiberglass work... but I couldnt replace it for what I have in it.. Last edited by Bret : 03-28-2008 at 11:16 PM.